Southwest hire 01189 843 123   Tool hire 01189 843 970   Southeast hire 01634 799020

Skidsteer Planer 24"

Skidsteer Planer 24"

Bobcat 24" Fast cut planer - self levelling

The milling process involes low andle, high velocity blows in a controlled pattern that uniformly chips pavement. Depth, width, and slope control are easily set and maintained by the operator. Milled material can be immediately recycled, nicely finishing any asphalt and repair jobs.

£250.00 per week + VAT

£100.00 per day + VAT

£50.00 delivery each way

(If you do not have hired-in plant insurance you will be charged 15% of the hire rate for insurance. Fuel charges also apply.)

Carbide-tipped bits are mounted on a revolving drum to cut and pulverize pavement material. After material has been milled, it leaves the planer housing through a rear opening.

Planer skis are used to adjust the angle and depth by moving the right and left ski up or down. Depth gauges are visible from the cab to provide a measurement reference of each ski depth. Bobcat planers have better visibility of the skis, so operators can easily control the path of the planer and the machine. Even on rough terrain, the planer skis maintain surface contact, resulting in a consistent cut depth.
  • Oscillation: Housing oscillates up to  +/- 15 degrees allowing the operator the ability to cut necessary angles or match two uneven surfaces.
  • Replaceable Ski Wear Pads: Make maintenance easier and more affordable.
  • Steel Wheels: Mounted on the rear, wheels provide support and reduce tire bounce for a smoother cut.
  • Side Cutting Teeth: Decreases drum binding in the cut for smoother operation and provides a vertical edge for improving the joint bond between new and existing road layers.
  • Free Floating Oscillation: The cutting wheel oscillates side to side to provide optimum surface tracking regardless of loader movements, so even if the loader tires fall into a hole or depression it will cut evenly. With the Bobcat planer, pavement milling is a controlled process as the depth, width, and slope are easily set and controlled by the operator.
  • Hydraulic Side Shift: Side shifting allows milling outside the width of the carrier, making possible flush cutting adjacent to curbs and walls.
  • Large Rear Opening: Reduces the amount of material being re-milled, increasing productivity because more material can be removed from the planer before it is reground into smaller pieces.
  • Removable End Plate: As the only manufacturer of this feature, Bobcat allows the planer to mill flush against wall with no further clean-up work required.
  • Visible Left Ski: Keeps the planer centered and provides easier control over its path.
  • Top Access Panel: To inspect and replace cutting bits, a top access panel allows for easy inspection and saves maintenance time. Planer bits can be changed and removed using the specially designed bit tool.
  • Planer Drum: One-piece concentric unit made for better durability and smooth cutting.

Share this page